How To Properly Use a Cordless Drill

New to drilling? We've got you covered. Follow these tips to properly use a cordless drill

Use these tips to use a cordless drill the right way

A cordless drill is a handy and effective tool that any homeowner should add to their collection. No matter what type of DIY or home improvement project you’re working on, a good drill can save you a significant amount of time and effort. If you’re looking for the best cordless drill to enhance your home project, there are many different types to choose from that can make your job easier and more efficient. However, you first need to understand how to use a drill properly in order to maximize its benefits. Follow these guidelines to make the most of your cordless drill and get your work done faster.

Choosing a Drill

Before you learn to use a drill properly, it’s crucial to ensure that you select the one that best meets your needs. Most cordless drills come in a kit that contains essential parts that go along with your drill. Some of the main parts that you should look for in a drill kit include:

  • Batteries
  • Battery charger
  • Case
  • Screwdriver bit

Once you’ve confirmed that you have all the parts you need, it’s time to decide what voltage is best for you. A higher voltage is equated to a stronger drill, so you may want to consider what types of projects you’ll be working on and how much power they will require. If you need to drill and drive screws through harder wood, an 18-volt drill would likely be more useful than a 12-volt drill. Ultimately, your choice of tool depends on what your personal goals are when working on DIY projects.

Choosing the right tool is only the beginning of your journey with your new cordless drill. The next step is to learn how to use it correctly.

How To Use Your Drill

Using your drill properly may seem overwhelming if you’ve just purchased it. However, with enough time and practice, it can become second nature. Follow these steps to correctly operate your drill.

1. Adjust Forward/Reverse Control: The sliding switch on your drill is known as the forward and reverse control. This feature has a series of arrows that indicate the direction in which the drill will drive. Before you use your drill, be sure to set the switch in forward or reverse, depending on how you are using the tool.

2. Change Speed: After you’ve adjusted the forward/reverse control, you need to change the speed of the drill. Most drills have two speeds that you can choose from based on the type of work you will be doing. You can choose the low speed/high torque setting if you’re planning to drive screws, and the medium speed/torque setting for both driving and drilling. When changing the speed, be sure that the tool is turned off so that you don’t damage the gearing.

3. Adjust Clutch: Adjusting the clutch is a crucial step in using your drill properly. The numbers that are displayed on the drill collar represent the clutch settings. By choosing a higher number, you allow the clutch to deliver a higher torque range. If you aren’t sure which setting to choose, simply start driving a screw and adjust the clutch accordingly. The goal is to successfully drive your screw without overdriving it or disengaging the motor.

4. Activate Drill Setting: When you’re ready to drill, set the arrow on the icon of a drill bit that is found above the highest number of the clutch setting. Make sure you proceed with caution when taking this step. Avoid using the drill setting while driving screws or fasteners, as this can lead to severe injuries.

5. Open Up Keyless Chuck: When you need to attach drill and driver bits, you’ll have to access the keyless chuck. Open up the chuck and rotate the chuck sleeve counterclockwise until the bit is able to fit inside. Continue to rotate the sleeve clockwise while you slowly insert the bit and wait until the sleeve stops rotating or you hear a click.

6. Check Charge Indicator: To see how much charge the drill battery has left, press the battery icon on the indicator battery pack. If the indicator light isn’t present on the battery pack, it may be built into the drill itself. Make sure you check the battery level in advance to avoid running out of power while you’re working.

These steps can help you maximize the efficiency of your cordless drill. When you include a quality drill in your collection of home tools, and follow the proper safety and maintenance procedures, you can benefit from faster and more effective work.

Resources — Popular Mechanics, Kravelv